© 2007
Multigas DetectorMultigas Detector
Reliability in a small package
What It IsWhat It Is
Personal 4-gas monitor
Detects O2, H2S, CO andcombustible gas
Rechargeable Li-polymerbattery
Standard:
Event log
Full data log
Vibrating alarm
What It Is NotWhat It Is Not
Not to detect NO2
Or other ‘exotic’ gases
No alkaline option
Runs for >16 hrs!
No built-in pump option
Use ALTAIR 5
No multi-language
Icon-driven, use ALTAIR 5
Small SizeSmall Size
Small, unobtrusive,lightweight design
Easy to wear all day
Alarms visible from 360º
Fits in gloved hand
One-handed operation
Robust construction
Rugged DesignRugged Design
Over-molded case design
Built-in rubberized armor
Impact shock protection
Easily survives a 10-ft drop
Easy to grasp and hold
Sealed against water &dust ingress to IP67
Third-party tested
Dunk it in a bucket!
Multiple AlarmsMultiple Alarms
95+ dB horn typical
Multiple, alternating high-intensity alarm LEDs
On top and bottom of the unit!
Vibrating alarm is standard on all models
‘InstantAlert’ feature is standard
Activates all alarms when desired
Optional, unique to gas detection, ‘MotionAlert’feature
If no motion is detected for 30 sec. alarm sounds to alert others
Ideal for confined space entry
Provides ConfidenceProvides Confidence
Confidence signal
Green blinking ‘Safe LED’
Vibrating pulse
Confidence beep every
30 sec. to ensure operation
Can be turned off
Set-up mode
Advanced FeaturesAdvanced Features
‘MotionAlert’ feature
Indicates “Man Down”
‘InstantAlert’ feature
Activates all alarms when desired
Most rugged instrument inits class
Easily passes multiple 10 ft drops
IP67 rated by 3rd party
Water and dust tight
Bump check mark (24 hrs)
Ensures instrument wassuccessfully tested
Advanced FeaturesAdvanced Features
‘Safe LED’
Ensures instrument is operating safely
Missing sensor alarm
Helps prevent mistakes after service
Password-protected setup mode
Controls unauthorized access
Event & data log
>500 events
MSA Link-ready
Multi-language PC softwareto access records and change settings
BatteryBattery
Li-polymer technology
Virtually no memory effects
Holds charge better
Runs >16 hours
No need for expensive alkalines!
Cost of alkaline batteries
5 days/week x 50 weeks = 250 days
250 x $3 = $750/year!! + labor
Many MarketsMany Markets
Oil and Gas
Chemical
Fire
Utilities
Agriculture
Construction
Steel
Water
Various IndustrialApplications
Start UpStart Up
Operation is similar to the Solaris:
Performs diagnostic self-check
Display
3 alarms
Missing sensors
Displays:
Instrument name
Software version
Combustible gas type
Toxic units (ppm or mg/m3)
Alarm set points (Low, High, STEL, TWA)
Start UpStart Up
Displays expected cal. gas concentrations
Shows current time and date
Indicates last successful cal. date
Indicates next cal. date (if activated)
Shows measurement countdown
Offers fresh air setup option
Defaults to measurement page
PagesPages
Measurement (default)
Bump
Peak readings
Minimum oxygen reading
STEL for toxics (if activated)
TWA for toxics (if activated)
Time
Date
‘MotionAlert’ (if equipped and enabled)
Data LogData Log
Event logging (500 events)
Gas and battery alarms
Cal. and bump records
Battery voltage
FAS, re-zeroings, calibrations
Reset of TWA, STEL and Peak
Gas records(>50 hours)
Reading
Time and date
Peak, Min, Average
Temperature
Graphs & tables
Infrared-based ‘MSA Link’- compatible
Change instrument settings
Last successful calibration date
Set UpSet Up
Password-protected access
Change:
Individual sensor channels
Combustible gas type
AutoCal. values
Cal. due on/off
Alarm set points
Low, High, STEL, TWA
Date
Time
Other settings through MSA Link
Multi-language
CalibrationCalibration
“Single Button AutoCal” based
Access can be password protected
Same Solaris calibration cylinders
1.45% CH4
60 ppm CO
15% O2
20 ppm H2S
10048280 (34L)
10045035 (58L)
CalibrationCalibration
1.Press and hold ‘Reset’ button
2.Instrument prompts user to “Zero Cal?”
3.Press ‘On/Off’ to accept & initiate zero function
Or press ‘Reset’ to cancel function
4.Unit will automatically zero sensors
‘Zero pass’
5.Instrument prompts user to “Span Cal?”
6.Attach cal. cap & flow cal. gas to instrument
7.Press ‘On/Off’ to accept & initiate span
Or press ‘Reset’ to cancel function
8.Unit will automatically span sensors
AccessoriesAccessories
Galaxy AutomatedCalibration System
Bump test and calibration
Record keeping
QuickCheck (Q1 2008)
Bump test only
Records activities
Charging cradle
Universal pump probe
Low-MaintenanceLow-Maintenance
Low level of end-user maintenance required:
Separate sensors
Sensor replacement kit
Filter, gasket, etc. kit
Front case with built-in filter
Battery and electronics
Most components available asreplacement parts
WarrantyWarranty
Standard 2-year comprehensive warranty
Sensors
Electronics
Battery
Optional extended warranty
1 year extra
2 years extra
Part of ATO!
Questions?Questions?
Thanks!Thanks!