IBM® TotalStorage®
IBM Internal and IBM Business Partner Use Only |
© 2005 IBM Corporation
EXP810 cabled to DS4700 and DS4800
IBM® TotalStorage®
IBM Internal and IBM Business Partner Use Only |
© 2005 IBM Corporation
Objectives
List the basic steps for installing the DS4700 or DS4800with the EXP810 drive enclosures
Employ proper cabling techniques/methodology
Follow proper power on/off sequence
IBM® TotalStorage®
IBM Internal and IBM Business Partner Use Only |
© 2005 IBM Corporation
Steps for Hardware Install
1.Unpack the hardware according to the directions in the unpacking guide thatshould be attached to the outside of the shipping carton.
2.Install the cabinet, controller enclosure and drive expansion enclosures byfollowing the directions in the hardware installation guide.
3.Attach the power cables.
4.Attach Ethernet cables - one to each controller.
5.Cable the controller and drive expansion enclosures.
6.Check the link rate switch on all enclosures.
7.Turn on the power in the correct sequence.
8.Set the controllers’ IP addresses
9.Attach the host interface cables
IBM® TotalStorage®
IBM Internal and IBM Business Partner Use Only |
© 2005 IBM Corporation
Cables
IBM® TotalStorage®
IBM Internal and IBM Business Partner Use Only |
© 2005 IBM Corporation
Cabling
IBM® TotalStorage®
IBM Internal and IBM Business Partner Use Only |
© 2005 IBM Corporation
Cabling
Controller Tray
B
A
B
A
Expansion Trays
IBM® TotalStorage®
IBM Internal and IBM Business Partner Use Only |
© 2005 IBM Corporation
Controller Tray
Expansion Tray
1 Expansion Tray
IBM® TotalStorage®
IBM Internal and IBM Business Partner Use Only |
© 2005 IBM Corporation
Controller Tray
Expansion Tray
Expansion Tray
2 Expansion Trays
IBM® TotalStorage®
IBM Internal and IBM Business Partner Use Only |
© 2005 IBM Corporation
Controller Tray
Expansion Tray
Expansion Tray
Expansion Tray
3 Expansion Trays
IBM® TotalStorage®
IBM Internal and IBM Business Partner Use Only |
© 2005 IBM Corporation
Controller Tray
Expansion Tray
Expansion Tray
Expansion Tray
Expansion Tray
4 Expansion Trays
IBM® TotalStorage®
IBM Internal and IBM Business Partner Use Only |
© 2005 IBM Corporation
Controller Tray
Expansion Tray
Expansion Tray
Expansion Tray
Expansion Tray
Expansion Tray
Top-Down
Bottom-Up
5 Expansion Trays
IBM® TotalStorage®
IBM Internal and IBM Business Partner Use Only |
© 2005 IBM Corporation
Controller Tray
Expansion Tray
Expansion Tray
Expansion Tray
Expansion Tray
Expansion Tray
Top-Down
Bottom-Up
6 ExpansionTrays
Expansion Tray
IBM® TotalStorage®
IBM Internal and IBM Business Partner Use Only |
© 2005 IBM Corporation
Cabling
IBM® TotalStorage®
IBM Internal and IBM Business Partner Use Only |
© 2005 IBM Corporation
DS4800 Cabling with EXP810
IBM® TotalStorage®
IBM Internal and IBM Business Partner Use Only |
© 2005 IBM Corporation
Full Configuration with EXP810s
Loop pairs 1 and 3 will run at the same speed
Loop pairs 2 and 4 will run at the same speed
IBM® TotalStorage®
IBM Internal and IBM Business Partner Use Only |
© 2005 IBM Corporation
DS4800 and EXP810 and EXP710 Intermix Guidelines –Per Loop
No.EXP810
No. Drivesin EXP810
No.EXP710
No. Drivesin EXP710
TotalNumber ofDrives
0
0
8
112
112
1
16
7
98
114
2
32
6
84
116
2
32
5
70
102
3
48
4
56
104
4
64
3
42
106
5
80
2
28
108
6
96
1
14
110
7
112
0
0
112
Configurations where a total number of drives over 112 per loop are not supported.
IBM® TotalStorage®
IBM Internal and IBM Business Partner Use Only |
© 2005 IBM Corporation
DS4700 / EXP810 - enclosure LED's
Link Rate Switch:Left – 4GbpsRight – 2Gbps
IBM® TotalStorage®
IBM Internal and IBM Business Partner Use Only |
© 2005 IBM Corporation
Turn on the Power
1.drive enclosures
2.controller enclsoure
Turn off the Power
1.controller enclosure
2.drive enclosures
IBM® TotalStorage®
IBM Internal and IBM Business Partner Use Only |
© 2005 IBM Corporation
Any Comments?